Expedition 33 Journal Marker

Even if we fail, we lay the trail for those who come after.Life sized journal marker from the game Clair Obscur: Expedition 33This 3D-printed journal marker is designed to be printed in separate parts, in either PLA Natural or PETG Translucent Clear, to then be assembled with super glue, 12x 4x2mm round magnets, 12x 8x2mm round magnets and RGB tealights. I will link which specific ones in the bill of materials below. I have uploaded .3mf files for both materials, and pictures of both to show the differences. In short:PLA Natural: Easier to printShows better colour PETG:StrongerBrighter lightPrint guide:This is a difficult model to print, and should only be printed if you know what you are doing. The printed parts are very thin, and thus need support to print well. It will also challenge the setting “slow_down_layer_time” in the cooling tab in your filament settings. I have found that increasing this to 20 seconds gives a good quality of the printed part. The infill pattern in the .3mf