Thingiverse
Extender vibration mount
por HonestPE
3
Descargas
7
Likes
0
Makes
Vibration motor mount for https://www.amazon.com/dp/B0CBPQXGMM
Need 4x 1/4-20 screws (0.75" long) and nuts
DO NOT ATTEMPT INSTALLATION WITHOUT THE PROPER TOOLS TO REMOVE THE BASE.
Pre-assembled Hog Stretchers have the base screwed on using "removable" thread locker which can be challenging to remove. If you strip out the screws using a screwdriver, you will need to use slip joint pliers to grip the outside of the screw which will significantly damage it. You will need replacement screws.
Even with the thread locker, the screws are removable with some effort. Make sure to use an appropriate amount of force and to hold the base in a way that you do not flex it. If you damage the base, I offer replacement parts at HonestPE.shop.
Need 4x 1/4-20 screws (0.75" long) and nuts
DO NOT ATTEMPT INSTALLATION WITHOUT THE PROPER TOOLS TO REMOVE THE BASE.
Pre-assembled Hog Stretchers have the base screwed on using "removable" thread locker which can be challenging to remove. If you strip out the screws using a screwdriver, you will need to use slip joint pliers to grip the outside of the screw which will significantly damage it. You will need replacement screws.
Even with the thread locker, the screws are removable with some effort. Make sure to use an appropriate amount of force and to hold the base in a way that you do not flex it. If you damage the base, I offer replacement parts at HonestPE.shop.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!