External Chassis Ender3_v2 (PSU + Controller)

Just an external chassis so you can put the power supply and controller board outside an enclosure. The files for the chassis is:

all_chassis_v2_base.stl
all_chassis_v2_lid.stl

**IMPORTANT!**
**You will need to put rubber pads under the chassis to elevate it so that it can have airflow. The vent is located at the bottom. I left the bottom flat to make it easier to print.**

For the controller side, the lid is modded to fit a 70x70x15mm fan. You could modify the stp file for a different fan size if you want.

(Optional)
For the psu side, you can print the 120mm fan adapter in 2 parts and glue them together:
* 120mm_psu_top.stl
* 120mm_psu_bot.stl

or you can print them both as a singular piece if your printer is big enough:
* 120mm_psu_fan_allin1.stl

You would also have to cut the sides of the metal psu casing and bend them back to fit the four corners of the 120mm fan adapter.

The 120mm fan casing mod isn't required, but it can drastically reduce the fan noise.