External wall insulation anchor

This fixing can be used to hold external wall insulation onto your house securely and with far less thermal bridging than other commercial screw solutions.

See [here](http://omattos.com/2022/09/15/external-wall-insulation-fixings.html) for details of thermal analysis.


Combine it with a 70mm wood/masonry screw and wall plug. Just drill the 7/8mm hole in the foam and masonry at the same time, then push hard and this will slide into the hole and be pulled in by the screw giving a very secure fixing. Designed for 100mm foam, but can be adjusted for other thicknesses.


Print in ABS or PETG - PLA isn't good for long term outdoor use.


Can print in 11 minutes with a 0.3mm nozzle, which is good considering you'll probably be needing ~400 for most projects...