ExtraTerrestrial HueForge

AI image. Then used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made three versions size model/profile, the first is 200x200, the second for A1Mini 175x175 and last one is circle model diameter 178mm. The color change settings are identical. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2mm and the Actual Depth is 2mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Dark Gray Transmission Distance: 1.4 PLA Elegoo + White Transmission Distance: 8.9This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Gray At layer