Extreme Gaming (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 138.92x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Yellow for the rest. Remember if you sant to scale, do it only with x and y axis, z must be the same as original. Boost MeBoost Me (for free)Dir gefällt mein Modell?Dann würd ich mich über eine Unterstützung mit einem kostenlosen Boost-Token sehr freuen. Vielen DankDo you like my model?Then I would be very happy if you supported me with a free boost token. Thank you very much