Extrudr Spool Storage Tower

Some of you already downloaded and printed the Drawers i made for the Extrudr M Spools.And here are the parts to turn them into a tower. I simply used a 28 mm diameter wooden broomstick - i made 3 sizes for now, 25 mm, 1 inch and 28 mm. If you needed any other sizes, you can make your own remix or simply comment what you need and i will add it.You'll need 3 printed parts per spool.Bearing Stick [stick diameter]Bearing Spool A andBearing Spool B Bearing Stick:This one gets mounted to your chosen stick.Either one of the existing one fits, you remix the inner hole diameter yourself, or comment what you need.This allows for 3x 4mm countersunk woodscrews to screw it to the stick. Bearing Spool A and B:Turn both around, and screw part B into part A. After checking if it fits, you can unscrew, add some ca glue on the threads and put them back together. I noticed that the inside hole of the spools vary. So i undersized part B a bit so you can just add some tape, to make it a tight fit to your