Eye Sauron Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x124.93mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Yellow Transmission Distance: 9.3This print uses 3 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Yellow for the rest.