Ezviz H9C bracket

Required HardwareTo mount the camera to the bracket, you will need the following metric hardware:4x M4 Screws (14mm length) – Hex head or Button head recommended.4x M4 Nuts – Fits perfectly into the recessed slots.Assembly InstructionsInsert the M4 nuts into the hexagonal recesses on the back/inner side of the bracket.Align the Ezviz H9c mounting plate with the holes on the front of the bracket.Thread the 14mm M4 screws through the plate and bracket into the nuts. Tighten firmly, but do not over-torque to avoid stripping the plastic.Mount the entire assembly to the corner of the building using standard wall plugs and screws (not included).