F#CK-YOU Lightbox

A friend of mine asked if I could create a decorative lamp that says "F#CK YOU". As I already created several name lamps for my kids I created the “F#CK YOU”-lamp my print settings:Layer Height 0.2mm15% Infillno supportsAs the “space” is not illuminated the cover of it is solid and should be printed with the same filament as the bodies. cables can be routed through. To light it you'd need:LED strips (I used RGB WS2812 strips (5V, 30 LEDs/meter)RGB LED controller ( matching the LED strip you use, e.G. for WS2812b with remote or ESP32 with WLED)power source (matching the power needs of the LED strip you use. In my case 5V/3A)cablesHow to assemble:1. Glue the bodies of the letters with superglue2. Mount the LED strips. I have mounted them on the bottom of the bodies with the LEDs facing upwards to the covers (see picture), but they can also be installed on the side walls.3. Connect the controller and the power source4. Check if everything works as expected5. Now you can glue t