F-style Clamp

Inspired by the traditional f-clamps, this is a fully 3d printable version. You can use it to hold parts together after gluing them together for example. Print instructionsUse 6 or more walls and 25% infill for the central bar and screw. Use 4 walls and your normal infill percentage for the top and bottom clamp. Other parts can be printed with defaults.You want it to be as rigid as possible (especially the central bar) so I recommend PLA over PETG because of the higher rigidity of PLA. The TopCap and the ScrewTopCap can be optionally printed in TPU. If you don't want that you could also leave out the ScrewTopCap entirely.I have added two different lengths for the bar. With the 16cm version you can clamp objects up to about 11cm. And with the 22cm version up to 17cm. I could add other lengths if desired.A plastic clamp will never be as rigid as a metal version and this clamp will bend quite a bit when put under enough force. I find it good enough though to hold some 3d printed parts