F1 Display Wheel

A few things that are important : if you are going to scale down the tire ( I do not recommend it) be sure that you check the quality of the letters and stripes in your slicer. if you gonna use your own print profile for the tire, make sure that you verify the bottom part of the tire in the slicer for any overhangs. If you see even a single blue line, IT WILL fail. especially for the tire, it is very important to have the printer calibrated and the filament calibrated and dry. The bottom and top will be printed at 0.08 layer height (if you use my profile), so there is very little room for error. make sure that you are happy with the position of the seam. Use seam painting tool in Bambu Studio to customise it, if you do not agree with my choices.. This applies to all components. pretty much every mesh in this design is a high-res mesh. But this is especially true for the tire and the rim spokes. So depending on your computer, it might take a while to slice it. Have patience. I had to us