F1 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.53x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.88mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Grey At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to White At layer #25 (2.08mm) swap to White for the rest.