F1 Lightbox

An F1 Lightbox designed in Fusion 360. There is the main body which is printed face down at a .2 layer height, then the back panel which is printed face up at the same layer height. The back panel has two cutouts for the USB-C connected to power the internal LEDS that are placed around the 10mm lip of the back plate, as well as a switch to turn the lights on and off. Links for the USB-C connector, Switch, and LEDS I used are below. There is also an optional diffuser component that can be used if pinholes are present, but the included profile should eliminate most/all of them. Link for LEDs, Switches, and other components used: https://bit.ly/m/Additive-Imprints