Thingiverse
F450 Drone Electronics Housing
por b14ckyy
28
Descargas
21
Likes
0
Makes
This is a complete Electronics Housing for the F450 Type Quadcopter found here: https://www.thingiverse.com/thing:1206960
In this case you can Store PDB and Flight Controller with 30.5mm Spacing like Pixhawk Mini or any standard INAV Capable F3, F4 or F7 Flight controller. It has also enough room to put an 30.5mm Receiver Module on the same stack. In the Cover part, there are also Mounts for an 3DR Radio and an Eachine TX526 Video Transmitter. The telemetry module can be mounted with a small cable tie and the video transmitter will hold itself with the plug or can be additionally glued in. The VTx channel display and control button are accessible from top. The GPS Mount is hollow to hide the cables inside. The VTx needs an Extension cable to mount the antenna on the side of the housing.
ATTENTION: When using an FC with integrated Magnetometer, DO NOT put the PDB inside the housing, because it will distort the compass. When using an GPS with Magnetometer, this is no problem.
In this case you can Store PDB and Flight Controller with 30.5mm Spacing like Pixhawk Mini or any standard INAV Capable F3, F4 or F7 Flight controller. It has also enough room to put an 30.5mm Receiver Module on the same stack. In the Cover part, there are also Mounts for an 3DR Radio and an Eachine TX526 Video Transmitter. The telemetry module can be mounted with a small cable tie and the video transmitter will hold itself with the plug or can be additionally glued in. The VTx channel display and control button are accessible from top. The GPS Mount is hollow to hide the cables inside. The VTx needs an Extension cable to mount the antenna on the side of the housing.
ATTENTION: When using an FC with integrated Magnetometer, DO NOT put the PDB inside the housing, because it will distort the compass. When using an GPS with Magnetometer, this is no problem.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
