Fabric flexible bag

This 3D printed bag can be used to hold some small items. This design referenced https://www.printables.com/model/544241-3d-printed-fabric and exteneded it with a slot/insert system for various applicans. It is reimplemented with openscad.Build steps:Caution: this making need some intermediate knowledge about slicer.this making can be fragile and might break under certain force with some small piece fall out, don't give it to little kids.Print napkin_bag_rigid_1stpcs and napkin_bag_rigid_2ncpcs, 0.4mm nozzle, layer height 0.28mm.Print connector2, need to clone 58 copies in slicer, layer height 0.2mmUse connector2 to connect two pieces together according to the picture below. Need to use some force to press. You can use something with flat bottom to help i.e. benchy. Note: connect2 is not symmetric but its okay if different connectors are installed in different direction, its hard to notice.Use connector2 to connect the side of the bag together. This needs some force, and need right