Face Hulk Hueforge

Boost MeProject: Hulk Face.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA Rosa Black Transmission Distance: 0.3PLA R3D Green Fluorescent Transmission Distance: 2PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Transmission Distance: 5This print uses 4 unique filamentsSwap Instr