Facit C1-13 Facit Logo

I needed a replacement logo for my Facit C1-13, so I modeled one myself. It isn't a replica of the original, but it's a logo that fits, and I'm happy with that.

Printed with 0.12mm layer height for the cover piece. The A triangle has to be attached with superglue, and the cover and backplate also benefit from superglue. The pins are a little too thin, but that didn't really matter in my case.

If you have a smaller nozzle, use that one. I just used the standard 0.4mm nozzle, and it didn't turn out as good as I had hoped.

I got the logo from here: https://commons.wikimedia.org/wiki/File:Facit.svg

Unfortunately, the logo had some broken geometry in the C that prevented me from extruding it in Fusion 360, so I had to fix it in Inkscape. Message me if you need the fixed file and can't create it yourself.