Slicer Discord
Fair Dice (TESTED) – Modello 3D stampabile da MakerWorld MakerWorld
Board Games

Fair Dice (TESTED)

163 Download
111 Likes
113 Makes
Vai al Modello
This is a fair dice. NOT as fair as a casino dice, but 3x fairer (is that a word?) than the real store-bought dice I tested it against. Now to explain the math and testing. Dice have 6 sides. This means that in the perfect world, each side would get rolled 16.667% of the time. Casino dice, which are very accurate, are off by an average of 0.5% (standard deviation). Store-bought dice aim to be off by 1-3% standard deviation. My dice (when I tested it on the published profile) was off by 0.96%. Pretty cool, right? I'll explain my methods now. The pips on a dice take out a little bit of material from the dice. A standard 16mm dice has 4096 mm^3 of material, and the pips on my dice take out 187 mm^3. That sounds like a lot, but it's only 4%. After that, the center of mass isn't quite in the center. Most are off by about an average of 0.05mm, which is what I measured mine at. The real dice I tested weighed about 6.1g, while mine weighed 4.8. That doesn't matter as much, dice
Categoria
Board Games
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Principiante Bassa affidabilità
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 0/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione