Other STL Download - FAIRYTALESby Sirprintzalot

“🔥 Stunning high-detail model ready for multicolor print! Cleaned up, optimized, and tested for smooth performance on the K1 Max – perfect for showing off your printer’s precision.”🛠️Best Print Instructions for K1 Max (CFS + Unicorn Nozzle Ready)🧵Print Quality SettingsLayer Height: 0.16mm for sharper detailWall Line Count: 3Top Layers / Bottom Layers: 4 eachInfill Density: 15–20% (Cubic or Grid pattern)🌡️TemperaturesNozzle: 215°C (for PLA)Bed: 60°CFan: 100% after layer 3💨Speed SettingsPrint Speed: 150mm/s (default)Outer Wall Speed: 60mm/s for cleaner finishTravel Speed: 250mm/sCombing Mode: Not in skin🎨Multicolor Printing with CFSAssign individual parts or painted areas to different extruders in your slicerUse a prime tower and wipe wall for cleaner transitionsMake sure to preheat and load all 4 filaments before print starts🧱Supports & AdhesionSupports: Enable Tree Supports if needed (overhang angle: 45°)Support Z Distance: 0.2mmAdhesion: Use Brim for taller prints🔧Other OptimizationsEnable ironing on top surfaces if you want a smooth top layerEnable “Only retract when crossing perimeters” for cleaner retractionsRun flow calibration if using new filament