Thingiverse
Falcon Smart Receiver PSU Mount
door derikwhittaker
41
Downloads
19
Likes
0
Makes
Simple to print, print face down.
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M3 - 12mm bolts/nuts (secure controller to mount)
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M3 - 12mm bolts/nuts (secure controller to mount)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!