Fall out boy cork tree

Project: Fall out boy cork tree.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 230x226.94mm in sizeYou may print at higher layer heights below the Base Thickness of 0.6mmThe Max allowed Thickness is 2.68mm and the Actual Thickness is 1.96mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #e70e19 PLA Polylite Pro Red Transmission Distance: 4.2 #55331a PLA PolyLite Brown Transmission Distance: 0.8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 2.1 #ffd91c PLA PolyLite Pro Metallic Gold Transmission Distance: 2This print uses 6 unique filamentsSwap Instructions: Start with PolyLite Black At layer #12 (0.64mm) swap to Polylite Pro Red At layer #20 (0.96mm) swap to PolyLite Black At layer #21 (1mm) swap to PolyLite Brown At layer #22 (1.04mm) swap to BambuLab Basic Jade White At layer #24 (1.12mm) swap to BambuLab Basic Blue Gray At layer #28 (1.28