MakerWorld
Hueforge & Lithophane
Go to Model
Fallout-NukaCola v3 improved version
15
Downloads
25
Likes
8
Makes
This is an improved version of the previous model. Filaments Used:- PLA BambuLab Basic Black - PLA BambuLab Basic Red - PLA BambuLab Basic Cyan - PLA BambuLab Matte Desert Tan - PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #16 (1.36mm) swap to Cyan At layer #19 (1.6mm) swap to Desert Tan At layer #25 (2.08mm) swap to Jade White for the rest. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 165x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 3.52mm and the Actual Thickness is 2.48mm Version 1 https://makerworld.com/en/models/395276-fallout-nuka-cola-hueforge#profileId-296542Version 2 https://makerworld.com/en/models/831273-fallout-nukacola-v2-blue-jumpsuit-hueforge#profileId-775711You can find the matching Hueforge frame here. https://makerworld.com/en/models
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!