Thingiverse

Fan chains accessory

by naxone

0 Downloads

0 Likes

0 Makes

Go to Model

2 hours printing
0.4 nozzle
0.2 layer
40% infill
50mm/s speed
no supports

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Fan chains accessory need supports when printing?

No supports needed for Fan chains accessory — it's designed to print clean off the bed.

How long does it take to print Fan chains accessory?

According to the design notes, Fan chains accessory takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Fan chains accessory available in?

Fan chains accessory is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Fan chains accessory free to download?

Yes, Fan chains accessory is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

2 Suggestions

Fan chains accessory

Similar Models

Add to Collection