Thingiverse
Fanatec Podium Button-Box with Support
par zaph0d
253
Téléchargements
191
Likes
0
Makes
Here a button-box case with its support to mount on your left side of your Fanatec DD1 or DD2.
There are 3 files to print:
1. BDBB_S01_BOX.stl (the box)
2. BDBB_S01_COVER.stl (the cover/panel)
3. BDBB_DD1_Support.stl (the support)
The button-box has a nice compact size of 140x140x4mm.
I used an M3x6x8 screwed insert in the 4 holes of the box to mount the cover with M3 screws.
Feel free to print just the support to mount anything on the left side of your Fanatec DD1 or DD2.
If you use it, post a make please!
There are 3 files to print:
1. BDBB_S01_BOX.stl (the box)
2. BDBB_S01_COVER.stl (the cover/panel)
3. BDBB_DD1_Support.stl (the support)
The button-box has a nice compact size of 140x140x4mm.
I used an M3x6x8 screwed insert in the 4 holes of the box to mount the cover with M3 screws.
Feel free to print just the support to mount anything on the left side of your Fanatec DD1 or DD2.
If you use it, post a make please!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !