Thingiverse
Fang Skull
63
Downloads
45
Likes
0
Makes
Fang is a fully 3D printable animatronic dragon.
These are the files for Fang's head.
You will see a file called All Skull Parts V2.Zip you should download this as it includes all the skull parts, some helpful pictures, and tells you which parts need to be scaled up to 150% in Cura.
You will notice that I have included the SCALE.STL this is not mentioned in the tutorial yet. You will have to print A LOT of these (90-100% infill) if you want to cover his head with scales (That way you can make him look fearsome & cool and hide the servos). to connect the scales together you must slightly heat the arm (with a soldering iron or heat gun. Just make sure not to heat the body) and bend it 90 degrees and put the arm trough the loop of the second scale and weld them together with a soldering iron. (Refer to pictures above).
Important Notes:
You will need x4 Segment_V2 (the neck) parts scaled up to 150% in Cura printed at a 10% or higher infill.
You will also need x2 of th
These are the files for Fang's head.
You will see a file called All Skull Parts V2.Zip you should download this as it includes all the skull parts, some helpful pictures, and tells you which parts need to be scaled up to 150% in Cura.
You will notice that I have included the SCALE.STL this is not mentioned in the tutorial yet. You will have to print A LOT of these (90-100% infill) if you want to cover his head with scales (That way you can make him look fearsome & cool and hide the servos). to connect the scales together you must slightly heat the arm (with a soldering iron or heat gun. Just make sure not to heat the body) and bend it 90 degrees and put the arm trough the loop of the second scale and weld them together with a soldering iron. (Refer to pictures above).
Important Notes:
You will need x4 Segment_V2 (the neck) parts scaled up to 150% in Cura printed at a 10% or higher infill.
You will also need x2 of th
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
