Fantasy Castle HueForge with frame

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 112.5x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 #5d4cb3 PLA BambuLab Basic Purple Transmission Distance: 1.7 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filaments Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Blue Gray At layer #17 (0.8mm) swap to Mistletoe Green At layer #20 (0.92mm) swap to Purple At layer #24 (1.08mm) swap to Red At la