FAST Pinball PCB Support Brackets

Contains a 4mm (.157”) PCB hole to accept a heat press fitting (https://www.adafruit.com/product/4255) for an M3 (3mm x 0.5mm x 6mm https://www.boltdepot.com/Product-Details.aspx?product=17866) machine screw. These heat press settings can be set with this soldering iron tip (https://www.adafruit.com/product/4239)

Built in Flange for backbox, cabinet side, or playfield mounting that accepts standard #6, #8, or #10 hex head screws.

Flange holes offset slightly to allow for nut driver clearance.

AirGap with convection openings under PCB for heat dissipation in both backbox/cabinet as well as playfield (vertical) mounting situations.

Playfield flange holes can usually be printed unsupported without issue.