Tools & Spare Parts STL Download - fast print multipurpose containersby Idea mx

set of containers designed specifically to be printed in vase mode, for saving material, caps also included24 containers24 extenders4 caps52 stl filesversatility: you can print the caps or use recycled caps: compatible with soda caps, water bottle caps, even CRC (child resistant closure) caps.also you can extend the original container if you need more space. 3 different heights: 10, 15 and 20 cms. 4 different diameters of 3.2, 4.4, 5.1 , and 6.7 cms. 2 different designs.low filament use: could be printed in about 16 grs of material per container for the smaller ones and less than 60 grs for the bigger ones.the largest could be used as tootbrush holder and pencil holder, and the smaller ones as short pencil holder, nozzle holder, etc.3D printing settingsdesigned specifically for vase mode printing, should not be printed in traditonal waysince it will be a single wall print consider lowering the speed of the layer fan to avoid warping during printing and use a small brim in the first layer for the largest prints.nozzle 0.66, 0.88 mm, 1 mm.layer height: 0.30 mmfirst layer: 0.20 mm (recommended).