Fear and Loathing

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x110.27mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #7 (0.64mm) swap to Pink At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to Yellow At layer #15 (1.28mm) swap to BambuLab Green At layer #16 (1.36mm) swap to Red At layer #22 (1.84mm) swap to Jade White for