Fellow Aiden Flat Base Brewer Adaptor

These adapters give you a flat base inside the brewing chamber of the Fellow Aiden to put a brewer with a flat base on. The hole in the middle is 65mm. There are 2 options, 1mm and 3mm which are how high the top surface of the adapter is above the minimum needed to get to a flat surface. PETG or better required for thermal properties due to heat in the brew chamber (though these should not come into direct contact with any water or brewed coffee) To bypass the warning to insert the green or blue Aiden baskets use this (as shown in the photos): https://makerworld.com/en/models/1656039-fellow-aiden-basket-bypass-magnets Adapters to suit other brewers & other Aiden accessories I've made can be found here: https://makerworld.com/collections/9205442