Fence flip stop block

Flip stop block for 50mm high aluminum extrusion with T-track.
Fastened with M10 bolt, just slightly grind down two parallell sides of the head to make it fit in the T-track.
M5x50 bolt for the flip function.
Also a positive stop assembly so you can set several positive stops for good repeatability.

Used a machine clamping lever to secure the block. Can of course print the included knob as well, but a bit more fiddly to have it pint straight back when fastened.

Printed solid, but should be fine with a lower degree of infill.

PS - I see the scaling is off when exported to .stl format.
For reference - width of the flip block should be 50mm.