Fence Smart Lock - August Lock 3rd Gen

I wanted a smart lock which I could unlock and had a spare August 3rd Gen lock lying around. This will not fit the other round August lock models. The latch is reinforced with a screw. From my tests, its easier to jump the fence, or break it, than to break Parts needed:2 qty - M3 x 16mm screws1 qty - 10x3" outdoor wood screw (to reinforce the latch) Other parts - Outdoor wood screws needed to attach the adapter and lock to the fence/wood. This might vary depending on if you have shims and the placement of the adapter, latch, and strike. These are the parts I used:2 qty - 10x1.25" wood screw (strike)4 qty - 10x2" wood screws to hold the latch2 qty - 10x2.5" wood screws to hold the lock mounting plateHow to construct: Its recommended that you put wood or find an area to mount the base/adapter where it will be level with the strike.In the following picture, I used a piece of woodHowever the wood wasn't a perfect fit, so I also printed shims to put it perfectly evenI in