Fern Moonlight

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x100mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
PLA+ Elegoo Black Transmission Distance: 0.8
PLA+ Elegoo Purple Transmission Distance: 2
PLA+ esun Gray Transmission Distance: 1.4
PLA+ Elegoo White Transmission Distance: 5.4
PLA+ Elegoo Yellow Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #9 (0.8mm) swap to Gray
At layer #10 (0.88mm) swap to White
At layer #21 (1.84mm) swap to Gray
At layer #22 (1.92mm) swap to Yellow
At layer #23 (2mm) swap to White for the rest.