Fetish 2.5in micro quad

The Fetish is a 115mm true X frame. 11xx motors with M2 holes, 5mm eye to eye. 2.5 inch props. I designed it around the HGLRC XJB F428-TX20 AIO Flight controller. You may be able to fit other 20x20 stacks in but I've tested nothing else myself. It looks like the new versions of this stack should fit. with my parts list it weighs in at 79g without props and lipo. AUW 138g
You'll need to print four FC stack mounts in TPU and install one M2 heat set threaded inserts into each. There is a picture above showing the placement of the inserts illustrated in red. The blue arrows show that the canopy feet (highlighted in blue) be stretched around the mounts and sandwiched between the carbon and the inserts. The holes will line up for M2 x 8mm screws.
The frame should be cut in 2mm carbon. Make sure that the grain of the weave runs perpendicular with the arms for maximum rigidity.

Demo flight video
https://youtu.be/n3MGvlfQi_w

My Parts List:
Printed parts - TPU
Frame - 2mm plain weave