FFCX TFT35 Mount

This is a mounting bracket for the FlashForge Creator X used for the Big Tree Tech (BTT) TFT35 V3. This is designed to fit into the display hole on the front panel, sandwiching the panel between the two parts.

This is designed to be used with the [Slim and Elegant BTT TFT35 V3 Touch Screen](https://www.thingiverse.com/thing:4246505) by [3Deddy](https://www.thingiverse.com/3Deddy).

The FreeCAD files are hosted on [GitHub](https://github.com/mobilinkd/ffcx-tft35-v3-mount)

You will need two M3 nuts, two M3x5 screws, and one M3x12 screw. You can probably use a shorter screw if that's what is on hand.

I needed to buy longer IDC cables to reach the SKR Pro 1.1 I installed in my printer. The 30cm cables were not long enough to reach the rear of the machine. I purchased some 50cm cables and these were a perfect fit.

Build the TFT enclosure. I found that it required a lot of patience and fine motor skills to get the four spacers aligned properly. Verify that the ball mount