MakerWorld
Sport & Outdoors
Model downloaden
FG Knot Tool
238
Downloads
83
Likes
128
Makes
Need the extra hand to tie an FG knot. Well this will help you. Designed to be used in 2 different ways. The mount can either be clamped or screwed to a table or if you are on the beach you can squeeze the main handle between your knees.There are many designs out there but i wanted to design my own to suit my style of fishing. INSTRUCTIONSto complete this setup of the FG Knot tool you will need2 x M6 x 35mm hex head bolts2 x M6 x 45mm hex head bolts4 x 6mm nutsPush the bolts onto the thumb screwsPlace the left and right arm together and using a 45mm bolt tighten it down with 1 of the nuts imbedded into the handle. make sure the arms both have the hex nut at the backIf using the washers place 2 on the 35mm bolts and then feed into the arms with nutsif using the mount feed handle into mount and then use the 45mm bolt to attach itstart by opening the arms to about 260mmplace the braid across the arms and make one loop between the washers and tighten downnow follow the best video ive seen
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!