FHANv2 Pad Case

I developed and created a PCB for a pad that provides the 40% of keys left behind from a full-sized keyboard when you take a 60% keyboard out. This 3D print object is a basic case that supports the PCB.

The tolerances on the print are very tight and some sanding may be required in the switch cutouts to get a good fit. The thickness of the top plate is 3.5mm therefore diode components should be mounted on the PCB away from the plate on the underside, and it is recommended that the diodes are soldered on the underside to prevent the solder joint from pushing on the PCB and case.

A video of the build for this with the case is available here: https://youtu.be/YiW8VHWHLUg