Fiat Ducato dash bracket joiner

This is a rather specific part but it may help someone out in a bind.

On some models of Fiat Ducato II there is a bracket for mounting the glove box that blocks access to the cabin fan. In order to remove and repair the cabin fan you need to pull the entire dash apart and unbolt and lift the main dash strut... Or you can cut the offending bracket off and use these joiners to re join it in combination with some glue.

If you have the guts to take an angle grinder to your car you will be able to follow your nose from here!

Standard print settings are fine. I used PLA.