Fidget ball

This is a print-in-place fidget. I’ve seen some videos of it, but couldn’t find any accessible file to print, so I took on the challenge. I spent some time studying it and experimenting in Fusion 360 until I achieved this result.
Added a base
**fidgetballChamfer.stl :**
is the ball alone with chamfer in the inner T guide, to eliminate the slightly overhang, you have to add supports from the printing plate


**fidgetballwBase.st:**
prints together the ball and the base, no need for any support as the base is the support - it separates easily and prints with no problems. -separation between ball nd base is 0.3mm
fidgetballwBase.st is the same but rotated to 90 degrees placed

**newpatternChamfer0.2 v1.stl**
same but separation of 0.2mm instead 0.3mm between sphere and cradle if the print brakes apart in some printers

highcraddel.stl :with a very high base to hold little side pieces-
*-i don't know if ot prints or separates well*
---
**Update**: i made a completely ne