Thingiverse
Fidget Spinner With M6 Nuts
por Jogvan_Flores
79
Descargas
57
Likes
1
Makes
This is a Fidget Spinner i made so i could get different color. and to use with M6 nuts. The reason why i used 3 small nuts in every arm, insted of a big M10 or M12. is Beacuse.. Then you can hide them (Pretty good) and only have the Bearing in the middle showing. The Spinner is 7mm tall, and Standard M6 nuts are 5,1mm tall. So i made the Covers 0,9mm tall.
I sanded mine to get rid of the "3D printing lines" so the top is nice smooth.
How to glue it: I lined the two pieces up useing the nuts. fx. i press in the nuts in the middle part (The blue part) and then i add glue to the top/bottom part, and press it in. Then i let is sit for 10-15 sec, and then quickly push out the nuts. Then let the part fully dry. repeat on the other side. the Covers are just press fit. but i glued everything together.
I have uploaded 3 files:
"fidgetspinner_m6_bottom_1.stl" Is the Top and the Bottom of the print (See the pictures above)
"fidgetspinner_m6_middle_1.stl" Is the Middle of the print (See t
I sanded mine to get rid of the "3D printing lines" so the top is nice smooth.
How to glue it: I lined the two pieces up useing the nuts. fx. i press in the nuts in the middle part (The blue part) and then i add glue to the top/bottom part, and press it in. Then i let is sit for 10-15 sec, and then quickly push out the nuts. Then let the part fully dry. repeat on the other side. the Covers are just press fit. but i glued everything together.
I have uploaded 3 files:
"fidgetspinner_m6_bottom_1.stl" Is the Top and the Bottom of the print (See the pictures above)
"fidgetspinner_m6_middle_1.stl" Is the Middle of the print (See t
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
