Fighting Samurai - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Overture Matte Light Gray Transmission Distance: 0.3
PLA Prusament Risotto Pigment Transmission Distance: 11
PLA Prusament Pearl White Transmission Distance: 5.4


Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Light Gray
At layer #13 (1.12mm) swap to Risotto Pigment
At layer #18 (1.52mm) swap to Pearl White for the rest.