Thingiverse
Filament Box Feeder
par man1ac
161
Téléchargements
96
Likes
1
Makes
Hey guys,
wanted to build a filament box and used some design of feeders to get the filament out. Wasnt quite satisfied with the versions that were available so I made my own.
The Feeder itself is from Amazon:
https://www.amazon.de/SIENOC-PC4-M6-Pneumatische-Schnellverschraubung-Gewinde/dp/B06XXCJ8TB/ref=sr_1_3?ie=UTF8&qid=1533655077&sr=8-3&keywords=pc4-m6
Use some PFTE Tube - fits perfectly.
In my Version the feeder is held by an inside part that. Both parts are fixed with M3 Screws (Round head with hex wrench). The Nuts should fit in the inner part.
I make the box airtight by using (on both parts) double sided tape. Works like a charm!
wanted to build a filament box and used some design of feeders to get the filament out. Wasnt quite satisfied with the versions that were available so I made my own.
The Feeder itself is from Amazon:
https://www.amazon.de/SIENOC-PC4-M6-Pneumatische-Schnellverschraubung-Gewinde/dp/B06XXCJ8TB/ref=sr_1_3?ie=UTF8&qid=1533655077&sr=8-3&keywords=pc4-m6
Use some PFTE Tube - fits perfectly.
In my Version the feeder is held by an inside part that. Both parts are fixed with M3 Screws (Round head with hex wrench). The Nuts should fit in the inner part.
I make the box airtight by using (on both parts) double sided tape. Works like a charm!
man1ac publie également sur
9 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
