Filament Detector Mount

Check video:

https://www.tiktok.com/@yoz_education/video/7457633270738504966

Basic Info:

- Mounts on 20mm^20mm aluminum extrusions
- PLA
- 30% Cubic Infill
- 1.6 mm wall

Version A: More smooth angle with the horizontal spool (https://www.thingiverse.com/thing:6881440)
Version B: More versatile

(I made the guide wheel screw hole extra tight just to be safe, use some force you will get the screw in. You can also widen the hole a little bit using a Phillips driver first.)

You need:

- 8mm x 22mm x 7mm bearing
- M5 T-nuts
- M5 Screws
- M3x10mm Screw

(To install version B you do not need to disassemble your printer. Just put the T-nut in the aluminum extrusion first, then put the mount on it.)

Designed by YOZ Education
TikTok @yoz_education
Instagram @yoz_education