Filament Dry Box

Filament Dry Box
Used some parts from others and made some modifications.

Added a 'bump' to the 1/2" PVC pipe bracket from SinfoniaSam to make the PVC pipe snap into position and not move.

Created an inner grommet w/ a funnel to facilitate threading the filament through when you can't see what your doing. The outer & inner grommets are based off of Bummster's designs.

This is the tote that I used. It was around $30 at Target.
http://sterilite.com/mobile.html?id=930&ProductCategory=251§ion=1

1/2" PVC Pipe (50cm long was a perfect fit)

A 'Wet Erase' Marker for labeling the filaments and various printer settings for best results when using that particular filament. These markers are nice as they can be erased with a damp paper towel but are not easily erased by accidentally rubbing against it.
I velcro'd the pen to the lid to always have it handy.

Hardware Used:
M3 10mm Bolts (x32)
M3 Nylon Lock Nuts (x32)

Tools Used:
Drill w/ small bit for pilot holes.