Thingiverse
Filament Dry Box
di Jensen_75
8
Download
3
Likes
0
Makes
Filament Dry Box
This filament Dry Box uses the Sterilite P/N 1933, 32 quart gasket box which can be found at Home Depot or Menards which is local to me.
All parts can use either 4-40 x 1/4 or M3 x 8mm hardware.
PVC Pipe is 1in inner diameter. and measures 15 1/8 in or 385mm.
The bottom screw of the Holder-One-Body is 5 1/4 in from the bottom of the bin.
Bowden connectors are M10 Thread for the Filament-Port.stl and the hole into the bin is 5/16 in
The PTC-Plug was snug fit with a 4mm PTFE tube with my printers tolerances but your part may vary.
This filament Dry Box uses the Sterilite P/N 1933, 32 quart gasket box which can be found at Home Depot or Menards which is local to me.
All parts can use either 4-40 x 1/4 or M3 x 8mm hardware.
PVC Pipe is 1in inner diameter. and measures 15 1/8 in or 385mm.
The bottom screw of the Holder-One-Body is 5 1/4 in from the bottom of the bin.
Bowden connectors are M10 Thread for the Filament-Port.stl and the hole into the bin is 5/16 in
The PTC-Plug was snug fit with a 4mm PTFE tube with my printers tolerances but your part may vary.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
