Filament Drybox

Combined a bunch of others drybox designs to create my existing setup.



List of Purchased Parts:

1. EZY Drybox 18L/19Qt from HomeDepot
2. Metal Rod 5/16 x 36'' for Filament Spools also from Home Depot. I have a fine thredded rod but a smooth one woould be ideal.
3. PTFE Connectors from AliExpress
- Used a total of 9 PTFE connectors on my setup.
4. PTFE Tube from AliExpress
- Got the 2m since its cheap. Only used a little less than a meter in total.
5. Humidity/Temp Sensor from AliExpress
6. M3 Hardware Hex Screw from Aliexpress
- Got the M3 282 piece kit.
- 20x M3 3x10 screws (All used for the filament guides on the drybox and on temp
sensor on the drybox)
- 6x M3 3x20 Screws (Used on sillica case, 3 screws each)
- All screw used with M3 Hex nut
7. Fillamet Roll Bearings from AliExpress
- 4x 608zz bearings for each roll, 16 total in drybox
8. Sillica Gel from AliExpress


List of Printed Parts:

1. Lack_Guide_Top/Bottom - Remixe