Filament Dryer Temperature Controller Mount

This mount is compatible with the XH-W3001, XH-W3002, and XH-W3005 temperature controllers (W3001,W3002,W3005). To install it, you will need:4 M4 bolts1 M4 thread tapInstallation InstructionsDrill two holes (4mm in diameter) in the correct positions.Tap the holes using an M4 thread tap to create threads in the print.Insert the M4 bolts from the inside of the box to the outside, where you want to attach the temperature controller.Secure the mount by tightening the two bolts. Once in place, insert the small cylinders to cover the bolt heads.Attach the temperature controller on top of the mount and use the remaining two bolts to secure it.Finish by inserting the last two small cylinders into the holes on the back to cover the bolts.That’s it! Your temperature controller is now securely mounted to your filament dryer box.Tips & NotesIf you're mounting two temperature controllers, print all parts together. If you're using just one, choose the side with the seam on the back for a cle