Slicer Discord
Filament Guide Runout Sensor – 3D-Druckmodell von MakerWorld MakerWorld
3D Printer Accessories

Filament Guide Runout Sensor

5 Downloads
0 Likes
0 Makes
Zum Modell
2 in 1 Filament Guide and Runout Spenser!Works with Runout Sensor https://www.amazon.ca/dp/B081NGYNMJ?psc=1&ref=ppx_yo2ov_dt_b_product_details and others like it.Bearing is a (688zz,8mm x 16mm x 5mm) ( https://www.amazon.ca/gp/product/B07VTMJ5N4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 )Need:2 - M3x25 for Lid threw too the bearing mount, you can use longer bolts with nuts of you want.1 - 688zz bearing1 - M6 Pneumatic Joint (not necessary if using double tube case)2 - M5 or M4 bolts, washers and T nuts for mounting the Riser. I used M4x9 with washers as that's what I had laying around. - Some tubingMaker JTron did a great job with the housing and Maker Lars has designed a clean swivel mount system. So I mashed them up, changed some things and designed a riser mount that would keep it out of the way (as much as possible) when at full height)After printing (you can use whatever filament and height you want) make sure you press the bearing in so that it sits flush with the bevel
Kategorie
3D Printer Accessories
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Thumquas veröffentlicht auch auf

22 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen