Thingiverse
Filament Guide
par PwnCNC
9
Téléchargements
5
Likes
0
Makes
------------------------
PwnCNC believes in our Makers community and is working to bring together non-printed parts and other items to help you make this or any of our things: https://pwncnc.com/make
------------------------
My print farm is setup on a large industrial rack. This leaves two shelves with (3) MK3S printers each. I also like to use 3kg spools, and like Prusa's farm, that are hanging from the shelf above. This causes issues with feeding the printers filament... this guide helps control a reverse-bowden tube. If you'd to setup a reverse-bowdens setup... check out https://www.thingiverse.com/thing:3425397
This design is inspired by another thing but can't find the original to give them proper credit.
This design has a 80deg angle instead of the 140deg angle they had. The smaller angle is since my filament is mounted in front of the machine instead of behind.
PwnCNC believes in our Makers community and is working to bring together non-printed parts and other items to help you make this or any of our things: https://pwncnc.com/make
------------------------
My print farm is setup on a large industrial rack. This leaves two shelves with (3) MK3S printers each. I also like to use 3kg spools, and like Prusa's farm, that are hanging from the shelf above. This causes issues with feeding the printers filament... this guide helps control a reverse-bowden tube. If you'd to setup a reverse-bowdens setup... check out https://www.thingiverse.com/thing:3425397
This design is inspired by another thing but can't find the original to give them proper credit.
This design has a 80deg angle instead of the 140deg angle they had. The smaller angle is since my filament is mounted in front of the machine instead of behind.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
